Pressure Washing in Eugene, Oregon
Locally Owned • Soft-Wash Only • Licensed & Insured
Driveways, sidewalks, siding, decks, and fences — cleaned with the right method for each surface. We’re a Eugene-local exterior cleaning company: high pressure where it’s safe (concrete and stone), gentle soft washing everywhere else, and never a pressure wand pointed at your roof.
How much does it cost? Most Eugene pressure washing jobs land between $150 and $600 — a two-car concrete driveway typically runs $150–$250. Written quote before we start, price locked in.
What do you wash? Driveways, sidewalks, patios, pavers, siding, decks, fences, and gutter exteriors.
Do you pressure wash roofs? Never. Asphalt shingles get low-pressure soft washing only — high pressure strips the protective granules. See our roof cleaning services.
Where do you work? All of Eugene (ZIPs 97401–97405) plus Springfield, Coburg, Junction City, Cottage Grove, and Veneta.
What Pressure Washing Covers in Eugene, OR
Not every surface wants the same treatment. Here’s exactly what we clean around Eugene homes — and the method we use on each one.
| Surface | Method we use | What it removes |
|---|---|---|
| Concrete driveways & sidewalks | High-pressure surface cleaner | Tire marks, moss, black algae |
| Pavers & flagstone | Medium pressure, careful on joints | Moss, grime, weeds in joints |
| Brick & natural stone | Medium pressure | Moss, lichen, efflorescence |
| Vinyl & fiber-cement siding | Soft wash: 3–6% sodium hypochlorite + surfactant, low-pressure rinse | Green algae, mildew, cobwebs |
| Wood decks & fences | Soft wash / low pressure, grain-safe | Gray weathering, algae, mildew |
| Gutter exteriors | Hand wash + low-pressure rinse | Tiger striping, algae, grime |
| Asphalt shingle roofs | NEVER pressure washed — soft wash only | Moss, algae, lichen (soft wash) |
Why We Never Pressure Wash Your Roof
We are a roof company first. The Asphalt Roofing Manufacturers Association (ARMA) advises against high-pressure washing on shingles: it blasts off the protective granule layer and can void manufacturer warranties.
Here’s the Eugene-specific caution: homes roofed before the mid-1980s can carry asbestos-cement shingles. The Register-Guard reported a Eugene case where power-washing an older roof released asbestos fibers and triggered an ~$11,000 cleanup under LRAPA oversight. On an older roof, high pressure isn’t just risky — it’s dangerous.
What we do instead: soft washing — a 3–6% sodium hypochlorite mix with surfactant, about 30 minutes of dwell time, then a low-pressure rinse. It kills moss, algae, and lichen at the root without touching the granules. That’s why our roof cleaning services are soft-wash only.
Pressure Washing Prices in Eugene, OR
Prices checked October 2026. Every job gets a written quote before we start — the price we quote is the price you pay.
| Job | Typical price band |
|---|---|
| Two-car concrete driveway | $150–$250 |
| Sidewalk / patio flatwork | $120–$220 |
| House wash (1-storey) — soft wash | $250–$350 |
| House wash (2-storey) — soft wash | $350–$500 |
| Wood deck or fence | $150–$350 (size & condition) |
| Gutter exterior brightening | $100–$200 |
Bundle and save: save 10–25% when combining pressure washing with roof cleaning or gutter cleaning.
What moves the quote: square footage, access (steep driveways, locked gates), severity of staining and moss, and water access on site.
Our 5-Step Pressure Washing Process
- Walkthrough & written quote. We look at every surface and lock the price in writing.
- Protect. Plants pre-wet and covered, outlets and fixtures masked, pets kept clear.
- Pre-treat & dwell. Cleaning solution applied, 20–30 minute dwell so organics release instead of being blasted.
- Surface-matched cleaning. Surface cleaner on flatwork for an even finish; fan tip kept moving on vertical surfaces; the zero-degree tip never touches wood, siding, or paint.
- Rinse & photo walkthrough. Final rinse with DEQ-compliant water handling (rinse water kept out of storm drains), then before/after photos and a walkthrough with you.
How Long Results Last in Eugene’s Rain
Concrete and flatwork typically stays clean 1–2 years. Siding: north-facing and shaded walls regrow algae fastest in the Willamette Valley — most homes do well on an annual or every-other-year wash. Decks: 1–2 years depending on sun and whether they’re sealed.
One warning: a wash that skips dwell time regrows in weeks — that’s why pre-treatment matters here.
Pressure Washing Service Area
We’re Eugene-local — based here, not driving in from out of town. We cover all Eugene ZIPs 97401–97405, including the Whiteaker, Friendly, Bethel, River Road, Santa Clara, Cal Young, and South Hills neighborhoods. Nearby: Springfield, Coburg, Junction City, Cottage Grove, and Veneta.
For the full lineup, see our roof and exterior cleaning services.
Frequently Asked Questions
What’s the difference between pressure washing, power washing, and soft washing?
Pressure washing and power washing are the same thing in everyday use (some companies heat the water and call it power). Soft washing uses low pressure plus cleaning solution — the method for roofs, siding, and wood. We match the method to the surface.
How much does pressure washing cost in Eugene, OR?
Most jobs $150–$600; a two-car driveway runs $150–$250; house washing $250–$500 depending on storeys. Every job gets a written quote before we start — the price we quote is the price you pay.
Will pressure washing damage my siding or concrete?
Not when the method matches the surface. Damage happens when high pressure hits the wrong thing — that’s exactly why roofs, siding, and wood get soft wash, and high pressure stays on concrete and stone.
Do I need to be home during the service?
No, as long as we have water access and gates unlocked. We send before/after photos and a summary when we’re done.
Is it safe for my plants and pets?
Yes — we pre-wet and cover landscaping, keep pets out of the work area, and rinse everything down after.
Can you pressure wash in the rain?
Light rain is fine (this is Eugene, after all); heavy downpours we reschedule because rinse-water control matters.
How often should I have it done in the Willamette Valley?
Flatwork every 1–2 years; siding every 1–2 years (shaded sides sooner); decks 1–2 years.
Can you remove oil stains and black streaks from my driveway?
Most oil spots, tire marks, rust, and black algae come out with pre-treatment plus a surface cleaner. Deep, years-old oil saturation may lighten rather than vanish completely — we’ll tell you honestly at the quote.
Request Your Free Inspection
Ready when you are. Fill out the form below for a free, no-pressure quote — we inspect first, then lock your price in writing.
Rather reach us another way? Contact us here.